36 “D” Squared

Description

The one you have been dreaming about. It’s got the full package. Sleek yet full body design, a payload section, laser cut fins and water slide decals. This rocket launches on two Estes D model rocket engines.

Additional Information

• Length: 36″
• Diameter: 2.217″
• Weight: 5.7 oz.
• Recovery: 24″ Parachute
• Fins: Laser Cut Balsa
• Altitude: 800′
• Parts List
  • Spacer Tube Yellow – 35004
  • Body Tube Payload (BT-60) (8″) – 31681
  • Nose Cone Plastic (PNC-60 (1)) – 71020
  • Body Tube Lower (BT-70) (4-1/2″) – 331680
  • Body Tube Upper (BT-70) (10″) – 30413
  • Adapter Plastic – 61291
  • Engine Mount Tube (2) (BT-50) (15″) – 30364
  • Tube Skirts Plastic – 61291
  • Engine Block (2) (AR2050) – 30164
  • Engine Hook (2) (EH-2A) – 35021
  • Engine Hook Retainer Ring (2) (EH-2A) – 35021
  • Centering Ring Cards (2) – 61293
  • Launch Lug (2) (1/4″ x 1″) – 38181
  • Launch Lug (2) (3/16″ x 2″) – 38166
  • Decal Sheet – 61146
  • Balsa Sheet Laser Cut – 61295
  • Parachute Assembled (24″) – 35803
• Recommended Motors:
  • 2 x D12-3, 2x D12-5, 2 x D12-7

Instructions

Photo Gallery

Build History

• 12/02/2006 – Purchased Estes 36 “D” Square from Hobby Lobby in Columbus, IN for $15.39 (Retail $21.99).
• 01/06/2008 – Linda started building model rocket.
• 01/12/2008 – Linda finished building model rocket.
• 09/24/2023 – Glued fin to body tube and filleted the joints with Gorilla Yellow glue. Glued tip of fin back on with Gorilla yellow glue.
• 09/29/2023 – Wiped model with alcohol wiper and spray painted with Rust-o-leum #328374 High Gloss Black.
• 05/07/2024 -0 Applied self-adhesive decals to model. Took picture of finished model. This completes construction of Estes #2119 36 “D” Squared model rocket.

Flights