Wacky Wiggler

ESTES Model #2182

Description

Can you say WIGGLE?? The Wacky Wiggler will give you hours of rocket launching fun! Goes up as 1 rocket made of 7 plastic sections that are held together by string, and comes down, still intact though, as pieces! And that a launch system comes with it is just an added bonus! Easy to assemble and comes with all pre-colored parts. And the body tubes are a silver holographic pattern so is super shiny and easy to see in the sky!

Additional Information

  • Length: 17.6″
  • Diameter: 1.1″
  • Weight: 2.3 oz.
  • Altitude: 800′
  • Recovery: Break Apart
  • Recommended Motors:
    • B6-4, C6-5

Instructions

Photo Gallery

Build History

  • 02/25/2003 – Purchased Estes Wacky Wiggler from HobbyLinc for $8.39 (Retail $11.99).
  • 06/14/2003 – Took pictures of bag and then parts. Scanned plans, fin, nose cone, motor mount can and coupler. Cemented blue motor mount and rings together. Cemented engine mount section to engine mount tube. Cemented engine mount assembly into lower slotted body tube section. Cemented launch lug and fins into lower body tube section slots. Tied shock cord to nose cone and glued upper body tube to nose cone. Cemented body tube sections to tube coupler. Pulled shock cord through small hole in coupler then tied a knot 12″ from nose cone. Continued tying a knot every 12″ after attaching a body tube section. Applied self adhesive decals and took pictures of completed model. This completes construction of Estes Wacky Wiggler model rocket #2182.

Flights

DateLocation#MotorComments

Posted

in

by

Tags:

Comments

Leave a Reply